|
| |
| Technical
Data |
| |
| Weight per liter
at 30°C Base |
Wembley Melamine
Clear Glossy 1.02 ± 0.02 kg
Wembley Melamine Clear Matt 1.03 ± 0.02 kg
Hardener for Wembley Melamine 0.84 ± 0.02
kg |
| |
| Mixing ratio |
Wembley Melamine
Base 90 parts by volume
Wembley Melamine Hardener 10 parts by volume
Wembley Thinner 20-30 parts by volume |
| |
| Maturation Time
30 minutes |
| |
| Pot life
Approximately 8 hours at 30°C |
| |
| Method of Application
Spraying |
| |
| Spray Viscosity
20-25 sec on Ford Cup B4 at 30°C |
| |
| Spray Pressure
30-40 p.s.i. (2.2-2.8 kg/cm2) |
| |
| Number of Coats
1 coat of Wembley Melamyne Clear Sealer followed
by 2-3 coats Wembley Melamine Glossy / Melamine
Matt. |
| |
| Covering Capacity
8-10 m2/litre per coat (depending on method of application
and film thickness |
| |
| Drying Time
at 30°C Touch-dry 5minutes |
Tack-free 2 hours
Sanding-dry 5-6 hours
Hard-dry overnight |
|
|
|
|
|
| DIRECTIONS
FOR USE |
| |
| For optimum
performance, Wembley Melamyne must be applied
at a temperature between 20°C to 40°C
and relative humidity not above 75%. |
| |
| Sanding
Sand with emery paper no. 320 or 400 between
application of successive sealer and finish
coats. Allow an inter-coat interval of 5-6
hours for spray application and 8-10 hours
by brush application. |
| |
Re-coating
Time 5-6 hours at 30°C for spray application.
8-10 hours at 30°C for brush application.
|
| |
Gloss
60°Gloss Head Wembley Melamyne Clear
Glossy 80% minimum
Wembley Melamyne Clear Matt 10-15% |
|
| |
